🚀 ROB RUN EXTERNAL OUT NOW! | 🔥 20% OFF Week, Month & Lifetime Keys With Code ROBRUN20 • Ends November 17th ×

Launch error fixes

Wardogs Anti-Cheat Error Fixes for Elytra

You hit Play, ELYTRA throws a code and Wardogs never reaches the menu. Most fixes going round for a Wardogs anti-cheat error come from unofficial guides. This page sticks to what Bulkhead, which makes the game, and Team17, which publishes it and answers its support threads, have actually published, and it says plainly where no official fix exists.

By Disconnect CheatsPublished 15 November 20268 minute readCheck live cheat status
The short answer

Read the exact code first. WD-L020 was a clash with a Windows 11 update that update 0.1.2 fixed, and Team17's current steps for it are Windows Update, DISM and SFC. For WD-L014, Team17 says verifying your game files on Steam usually sorts it, with an ELYTRA repair after that. Login failures point at your connection. Install failures and the refused executable message have no published fix, and Wardogs doesn't require Secure Boot or a TPM today.

Wardogs Anti-Cheat Error Codes and Their Official Fixes

Wardogs runs ELYTRA, which its Steam page lists as kernel-level anti-cheat with its own third party EULA. When it or the launcher can't start, you get a plain message or a WD code with a string of characters on the end. In the reports Team17 answers, a Wardogs ELYTRA launcher error reads "Unable to launch WARDOGS" with the code underneath.

So searches for Wardogs anti-cheat not working cover several different failures. Here's each Wardogs anti-cheat error against what has officially been said about it.

ErrorOfficial wordPublished fix
WD-L020Update 0.1.2 on 30 September fixed crashes caused by Windows 11 update KB5124010Yes. Team17 gave current steps on 14 November
WD-L014The Wardogs team said on 30 September that fixes were in the worksTeam17 steps, starting with a game file check
WD-L018The same 30 September postNo steps published
Anti-cheat login failedTeam17 treats it as a connection problemNetwork checks, NAT and antivirus
Anti-cheat could not be installedNothing officialNo official fix published
Refused the game executableNothing officialNo official fix published
NVIDIA Inspector warning at launchSeason 3 notes, 11 NovemberChange those options back

Wardogs Anti-Cheat Codes WD-L014 and WD-L018

Wardogs error code WD-L014 turns up in report after report in the Steam support forum. On 30 September the Wardogs team posted a note on Steam saying it knew about launch issues with WD-L014 and WD-L018 and that fixes were in the works for both. That thread carries no later update.

Team17 Support has kept answering WD-L014 reports since. Put together, its replies run in this order.

  1. Verify your game files. In your Steam Library, right click Wardogs, open Properties, then Installed Files, and click Verify integrity of game files. On 13 November Team17 said this usually sorts the error.
  2. Repair ELYTRA. Open the Wardogs install folder, find the Elytra folder, run the setup inside it, choose Repair and restart your PC.
  3. Rule out the network. In a longer November support thread, Team17 had players untick IPv6 on their network adapter, cycling it on and off if it was already unticked, restart, then try a mobile hotspot.
  4. Try the last resorts from that thread. Disable the Intel integrated GPU in Device Manager, and turn Memory integrity off under Core isolation in Windows Security. That second one switches off a Windows protection, so weigh it before you do it.
  5. Send a DxDiag. Press Windows and R, type dxdiag, click Save All Information and save it as a text file, then send it to Team17 through its support site or your Steam thread.

WD-L018 has nothing beyond that 30 September note from either company. Like any Wardogs anti-cheat error without published steps, send Team17 the full code, characters and all, plus a DxDiag rather than trusting a fix from a video.

Wardogs WD-L020 Anti-Cheat Crash After Windows Updates

WD-L020 is the one code with an official cause. Update 0.1.2 on 30 September fixed the WD-L020 crashes caused by Windows 11 update KB5124010. Some players still report it, and on 14 November Team17 answered one of them with these steps.

  1. Open Windows Update from the Start menu, check for updates, install everything and restart.
  2. If you're on the Windows Insider Program, stop taking preview releases, because they can cause compatibility problems.
  3. Open Command Prompt as administrator and run the three DISM image checks, CheckHealth, ScanHealth and RestoreHealth, in that order. Team17's reply has the exact commands. Let each one finish.
  4. In the same window, run sfc /scannow, restart and launch again.
  5. Still failing? Save a DxDiag and send it to Team17.

Notice the direction. The player in that thread had been rolling back KB5124010 as a stopgap, and Windows now says it's too late to remove it. Team17's answer points the other way, towards a fully updated Windows.

Wardogs Anti-Cheat Login Failed and Network Fixes

Players report a Wardogs anti-cheat login failed message after the game opens, when they go to play. It sometimes shows as error 1628505088, and another report shows 1147405308, authentication failed via online services. Team17 Support has handled it as a connection problem since the September betas.

  • Check your PC's time and date are synced. A player found a wrong clock stopped the anti-cheat signing in, and Team17 asked players to say whether the sync worked for them.
  • Work through Team17's network connectivity article. It covers Steam's server status, testing on a wired connection, firewalls and antivirus and closing background apps.
  • Ask your internet provider to open your NAT.
  • Allow the game's files through your antivirus and Windows Defender. For one player whose error only happened on a single provider, Team17 said that provider might need to allow them too.
  • If it still fails, Team17 asks for your country, Steam download region, internet speed, whether you use a VPN and your NAT type.

Server trouble can look like this too. The Season 3 notes acknowledged DDoS attacks on official and community servers in Asian regions and told affected players to try again once Season 3 launched.

Wardogs Anti-Cheat Install and Refused Executable Errors

Two messages have no official fix at all. If the Wardogs anti-cheat could not be installed, or the Wardogs anti-cheat refused the game executable, neither Bulkhead nor Team17 has published steps for that exact message in their notes, policy or Steam support replies at the time of writing.

The nearest official steps for this kind of Wardogs anti-cheat error are the ones Team17 gives for WD-L014, a game file check on Steam and an ELYTRA repair from the Elytra folder. They target a different code, so treat them as a sensible first try, not a confirmed fix, and send Team17 the exact message if they don't help.

One launch block does come with an official explanation. Since the Season 3 notes, if you've used NVIDIA Inspector or similar software to strip smoke or grass, alter geometry or LOD bias or change textures, the game stops you at launch with a warning asking you to close it and change those options. The warning is the fix. Change them back. Forcing a way past it is bannable.

Bulkhead's policy also says the game refuses to launch, or refuses to connect, when it detects tampering or cheat software. That's an enforcement rule rather than an error code, and the Wardogs anti-cheat guide covers how to tell a launch fault from a ban.

Does Wardogs Anti-Cheat Need Secure Boot or TPM

Does Wardogs require Secure Boot? Not today. Bulkhead's security and enforcement policy, last updated on 7 September, says it doesn't currently require Secure Boot or a TPM to be enabled to play online.

It keeps the door open. The same policy says Bulkhead may add the requirement if it's needed to protect the game, that it will announce it before it takes effect and that the game will tell you what to change on your PC. Players on the Steam forums have asked for it more than once since launch, so keep an eye on the update notes.

So if a guide tells you to switch Secure Boot on in your BIOS to clear a Wardogs code, that isn't an official fix for any Wardogs anti-cheat error on this page.

Wardogs Crash Fixes Beyond the Anti-Cheat

If Wardogs keeps crashing once it loads, or you're stuck with Wardogs not launching and no code on screen, Team17's replies from launch week to Season 3 repeat a short list. The fullest version came on 14 November.

  • Add your Steam and Wardogs folders to Microsoft Defender exclusions.
  • Close MSI Afterburner, RivaTuner and every overlay, with the AMD control panel overlay off too.
  • Run sfc /scannow and DISM, then install the latest Visual C++ redistributables.
  • Run Steam as administrator.
  • Turn off Smart App Control and hardware accelerated GPU scheduling, then restart.
  • On a Windows 11 Insider preview, go back to the stable 25H2 release.
  • Where drivers look like the cause, do a clean graphics driver reinstall with DDU, which Team17 also has a guide for.

In the same reply Team17 said it knows some players are still crashing and that the team is investigating. If nothing on the list helps, a DxDiag is the next thing it will ask for.

Who Fixes a Wardogs Anti-Cheat Error, and Who Can't

A Wardogs anti-cheat error belongs to the game's support. Team17 Support answers in the Report a Problem forum on Steam and through its own support site, and Bulkhead's policy lists support@bulkhead.com for questions.

Ban notices are different. The policy says only permanent account bans can be appealed, and on 14 November Team17 pointed a banned player to the ban appeal page in the Wardogs account portal, adding that player support can't decide appeals itself. Hardware bans are final under the same policy, and the Wardogs HWID ban guide sets out what BULKHEAD says about them.

Wardogs External product art showing a soldier in a scratched steel helmet with a dark visor, tan combat kit and a large backpack in front of a dark hillside with helicopters
Wardogs External is cheat software from Disconnect Cheats, with its own support. It has nothing to do with fixing ELYTRA or the game client.

A cheat provider can't fix any of this. Disconnect Cheats supports its own software, not ELYTRA, the Wardogs client or your account, and no cheat clears a game error or a ban. If the cheat itself stops lining up after a client download, that's down to offsets the provider updates, as the page on Wardogs offsets explains.

If you do run a cheat, know the stakes. Bulkhead's policy calls cheating the offence most likely to end in a permanent or hardware ban, and says the game can refuse to launch or connect when it detects cheat software.

The Wardogs cheats page sets out what Disconnect Cheats sells, and the Wardogs External product page lists every feature. Undetected on the status page is today's reading, not a promise.